VESS A8000 Series Articles

Vess A8600 Power consumption

2024-12-04T13:49:52.9100000

These numbers are derived from fully populated Vess A8600 chassis utilizing SATA drives under full load:

Product	System status	AC Input		Power Consumption (W)	Thermal Output
		Voltage (V)	Frequency (Hz)		(BTU/Hr)
A8600	Operation	110	60	259	883.967
		240	50	256.9	876.800

Product	System status	AC Input		Power Consumption (W)	Thermal Output
		Voltage (V)	Frequency (Hz)		(BTU/Hr)
A8600	Standby Mode	110	60	211	720.143
		240	50	210.1	717.071

Product	System status	AC Input		Power Consumption (W)	Thermal Output
		Voltage (V)	Frequency (Hz)		(BTU/Hr)
A8600	Power on Max	110	60	446	1522.198
		240	50	432.3	1475.440

PROMISE Vess A8000 Series Introduction Video

2024-11-22T16:05:12.2800000

VessA 8020 Power consumption

2024-10-31T14:30:26.4630000

These numbers are derived from fully populated Vess A8020 chassis utilizing SATA drives under full load:

Product	System status	AC Input		Power Consumption (W)	Thermal Output
Product	System status	Voltage (V)	Frequency (Hz)	Power Consumption (W)	(BTU/Hr)
Vess A8020	Power on Max	110	60
	Power on Max	230	50
	Idle	110	60	36,7	125,2571
	Idle	230	50	36,2	123,5506
	Operation	110	60	77,9	265,8727
	Operation	230	50	80,7	275,4291

Vess A8120: Connecting Vess R3600 Series iSCSI Storage

2024-10-29T13:03:23.5570000

At Vess R3600 Storage

1 Login the WebPAM PROe

2 Create a new Pool (Either Advanced or Standard)

3 Create a new volume

4 Configuring iSCSI Portals and Target

[ IP address of IO Portal ]

Some iSCSI initiators require a target name, it can be found here...

At the Vess A8120 Storage Server

5 Alternatively, you can start the service from Administrative tools. Open Control Panel -> Administrative Tools -> open Services -> Find “Microsoft iSCSI Initiator Service” service. Right-click on it and click on “Start” ; See the following image.

6 Setup the Vess A8120 iSCSI initiator

Open the iSCSI Initiator

Go to the iSCSI initiator's Discovery tab and enter the IP address of the IO portal created on the VR3600

Switch to Targets and connect to Initiator IP

ISCSI connection is established successfully

7 Check if a new Promise Vess R3604xx SCSI Disk Device is detected in the Device Manager > Disk drives

8 A new disk is recognized at Disk Management, with Windows Server it will be necessary to bring the drive online, then initialize the disk and create a new simple volume with NTFS format.

How to save OPAS(Service report) either via USB flash drive or via WebPAM ProE

2024-10-28T07:12:13.0370000

How to save OPAS(Service report) either via USB flash drive or via WebPAM ProE

One Plug Auto Service (OPAS) is a feature unique to Promise’s video surveillance solutions which is designed to offer a new level of user convenience that also helps reduce maintenance complexity and streamlines technical support. OPAS helps users easily collect all the necessary logs and data for the Promise support team to analyze the status of Vess A-Series NVRs.

Via [ USB flash drive]

Prepare a USB drive with FAT32 format
Create a folder named “opas” in the USB drive
Insert it into the USB port in the front Panel –Left Side
You will hear a few short beep sounds and then a long beep sound. Take it out after the long beep sound stops.
Send all files in the opas folder to us via email: support@tw.promise.com

OPAS USB: Lights GREEN if an OPAS device (USB disk) is detected, RED if the OPAS operation has failed, blinks GREEN when an OPAS operation is in progress.

[Vess A6600/Vess A6800/Vess A6600P/Vess A6800P/Vess A8600/Vess A8800]

Via [WebPAM ProE ]

1].Double click the icon – WebPAM ProE at desktop

2].Login with user name and password (default user name: administrator ; password: password )

3]. Go to the following path and click “Save” button

4].Here is the output.